Used for signal transmission of control systems for many building applications. These cables operate at 300/500 V and have a cross-section of 0.14 mm² to 2.50 mm². Depending on application requirements, PVC, HFFR, or TPU outer jackets, bare or tinned copper, and shielded or unshielded types are available. HFFR versions are less flammable in the event of a fire, are usually self-extinguishing, have low smoke density, and do not emit toxic or corrosive gases in the event of a fire. PVC control cables Halogen-free control cables

Energy, utility, and lighting cables for outdoor installations. Used in cable trays, antennas, or directly buried and operated by voltage levels from 300 V to 1 kV. Harmonized types are used as construction cables. Halogen-free and flame-retardant versions ensure a non-corrosive and highly visible environment during a fire. Armored and/or fire-resistant versions are available upon request. Unarmored power cables Armored power cables FireKab power cables

These cables are manufactured according to TS IEC 60189-2 standards and are used in fixed applications, switchboards, or subscriber systems. Depending on the application, PVC or HFFR outer jackets, with bare or tinned copper conductors, and shielded or unshielded cables are available. HFFR versions are less flammable in the event of a fire, are usually self-extinguishing, have low smoke density, and do not emit toxic or corrosive gases in the event of a fire. Fire alarm cables are used in indoor and outdoor spaces such as schools, hospitals, meeting rooms, and shopping centers where fire safety regulations are adhered to. These cables are preferred in communication, ventilation, lighting, and intercom systems. Shielded types protect the signal against electromagnetic interference and offer continuity in signal quality. Indoor telephone cables Fire alarm cables Industrial electronic cables

Used for data communication in automation systems, computer networks, and electronic control systems. These cables are produced with PVC, PE, HFFR, and TPU outer jackets, and are armored and screened. Designed for use in high-speed networks with high transmission speeds. For Ethernet cables, the connection length must not exceed 90 m according to ISO/IEC11801 and EN 50173. Cables designed for RS 485 or similar protocols allow for longer transmission lengths of up to 1 km and can be produced as armored or unarmored cables for indoor and outdoor applications. RS 232 - 422 cables RS - 485 cables Load cell cables

Servomotor cables have been developed for large frequency-controlled drive systems. They are used as high-power connecting cables between frequency converters and motor drives, reducing the effect of high electromagnetic interference signals. They are protected against electromagnetic radiation and are suitable for use in confined spaces. Application areas include the paper and packaging industries, the manufacture and assembly of industrial plants, industrial pumps, air conditioning and ventilation systems, the chemical, automotive, and food industries, and conveyor belts. Black outer jacket versions are suitable for direct embedded placement indoors and outdoors for fixed installation in dry, damp, and wet areas, offering UV resistance, resistance to acidic and oily environments, and moderate mechanical stresses. HFFR types are less flammable in the event of a fire, are usually self-extinguishing, have low smoke density, and do not emit toxic or corrosive gases during a fire.

Cathodic protection (CP) is a corrosion control method that can be applied to underground and submerged metal structures. The primary corrosion control method on a given structure is typically a coating system that can be between 50% and 99% efficient, depending on age, type, installation method, etc. A well-designed and maintained cathodic protection system takes care of the rest, resulting in a 100% efficient corrosion protection system. CP cable is used as a DC power cable buried directly in the ground in cathodic protection systems and protects against galvanic and electrolytic corrosion of metal objects—such as storage tanks, pipelines, wells, and marine vessels—that are buried or submerged in water. It possesses excellent wear resistance, crumple resistance, chemical resistance, resistance to oil, sunlight, and moisture resistance. PVDF insulation offers additional resistance to corrosive gases and brackish water and can be used for deep anode groundbed installations. Cathodic protection can protect all types of underground and submerged metal structures.

The 300 V instrumentation cables are dual-rated as Type PLTC according to UL 13 and Type ITC according to UL 2250. These cables may be preferred for instrument and control wiring, communication, ventilation, lighting, and intercom systems for emergency exits, equipment, and devices. Shielded types protect the signal against electromagnetic interference and provide continuity in signal quality. UL-approved, flexible cables for use up to 600 V are installed in cable trays, conduits, and ducts. They are used in production facilities, for all machinery, tools, and installation work, and industries such as the petrochemical industry. Suitable for use in dry, damp, and wet areas, outdoors, in cable trays, and open cable trays. Power and control cables. Cables for instrumentation, power, and control. Device wiring.

These cables are special electrical conductors for transferring power from solar panels to inverters and other components within an installation. The cables are designed to operate at a normal continuous maximum conductor temperature of 90°C. The permissible service life at a maximum conductor temperature of 120°C is limited to 20,000 hours. They are suitable for indoor and/or outdoor applications in industrial and agricultural environments.

The charging cable for electric vehicles can be safely used in areas with high population density, open/closed garages, and parking lots. They are also suitable for use in dry, damp, or wet areas.